BHJ's new 24" Degree Wheel provides the ultimate in ease of use, flexibility and accuracy.
The large diameter, .250"-thick anodized billet wheel provides .200" separation per degree mark and all marks wrap around the face and outside edge of the wheel for excellent clarity (below right).
The four curved spokes show the general intake and exhaust open/close ranges for quick reference and allow easy crank rotation by hand, even with the complete valvetrain installed.
The easy-off, easy-on wheel allows cam and gear changes without resetting TDC, as the hub remains bolted to the crank when the wheel is removed. The wheel is indexed to the hub in 15º increments, using three locating dowels (below left) for nearly unlimited TDC and pointer positioning.
Wheel Indexable in
15º Increments 4" Hand Nut Easily
Secures Wheel Timing Marks Wrap Around
The laser pointer and flexible mounting arm accept bolt sizes from 1/4" to 9/16", allowing virtually any mounting position or angle and ensure absolute readability from all view points, eliminating any guesswork.
The two-piece, heavy duty, billet steel hub has an integrated 1.250" hex and uses interchangeable crank adapters for simple and economical application changes. Adapters are available for all applications, including dual-keyways and custom sizes. A 4" O.D. knurled hand nut (above center) enables quick, secure installation and removal of the wheel.
The DGW-1 kit includes the 24" wheel, laser pointer with flexible mounting arm and two-piece hub with one crank adapter (specify size when ordering).