Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly valve seat cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes. Tungsten carbide leaves a perfectly flat, machined surface, ideal for optimal sealing efficiency and heat transfer.

Cutter Specifications:

• Cutter Body Diameter: 1.125"
• Cutting Angle: 15°
• Carbide Blade Type: P/N TC250 - 3/8" Tungsten Carbide
• Number of Blades: 3
  
• Approximate Cutter Range: 0.492" - 1.26" (12.5mm - 32mm)
• Pilot Type Required: .297" Top Size - 100 or 120 Series Pilots
• Hex Drive Size: 3/8" Hex Drive - Use with TW513 T-Handle or TWEZ Easy Turn Wrench

Neway 100 Series Small Diameter Cutter Bodies are designed to work with Neway .297" Top Size Valve Guide Pilots. These cutters are not compatible with the standard .375" Top Size Valve Guide Pilots. Neway Standard Diameter Cutter Bodies can be found by clicking here. All Small Diameter Cutter Bodies can be driven using the 3/8" T-Handle Wrench or the Easy-Turn Wrench with the 1/2" to 3/8" Adaptor.