Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly valve seat cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes. Tungsten carbide leaves a perfectly flat, machined surface, ideal for optimal sealing efficiency and heat transfer.

Cutter Specifications:

• Cutter Body Diameter: 1-1/4"
• Cutting Angle: 31° x 46°
• Carbide Blade Type: TC250 - 3/8" Tungsten Carbide
• Number of Blades: 3 Per Side
• Pilot Type Required: .375" Top Size - 140 or 150 Series Pilots
• Hex Drive Size: 1/2" Hex Drive - Use with TW505 T-Handle or TWEZ Easy Turn Wrench

Standard Series Neway Cutter Bodies are designed to work with Neway .375" Top Size Valve Guide Pilots. These cutters are not compatible with the Small Series .297" Top Size Valve Guide Pilots. Neway Small Diameter Cutter Bodies can be found by clicking here. All Standard Series Cutter Bodies can be driven using the 1/2" T-Handle Wrench or the Easy-Turn Wrench.

Product Instructions:
Neway Cutter Instruction Manual (1.9 MB Requires Adobe Acrobat Reader)