Head Surfacer Belt - 24 Grit Black Silicon Carbide
Cylinder Head Resurfacing Belt - 10" x 87" Black Silicon-Carbide for Cast Iron and Aluminum – 24 Grit
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 10 inch wide by 87 inch belts will fit the following machines: Rogers SB-1028, SF-1028, T&S Machine, Master Tool 1028
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 10 inch wide by 87 inch belts will fit the following machines: Rogers SB-1028, SF-1028, T&S Machine, Master Tool 1028
