Neway Valve Seat Cutter Kit - BMW Motorcycles

KM2299 Kit for BMW Motorcycles
Components suggested by the manufacturer

Kit Includes the Following:

Cutter Bodies:

122 Cutter — 1” dia. 45˚
125 Cutter — 1” dia. 75˚
126 Cutter — 1” dia. 30˚
212 Cutter — 1-1/4” dia. 15˚ x 75˚
607 Cutter — 1-1/4” dia. 30˚
608 Cutter — 1-1/4” dia. 45˚
216 Cutter — 1-1/2” dia. 75˚
623 Cutter — 1-1/2” dia. 15˚ x 30
635 Cutter — 1-5/8” dia. 15˚ x 45˚

Valve Guide Pilots:

100-5.0 Solid Pilot — 5mm dia.
100-5.02 Solid Pilot — 5.02mm dia.
100-6.0 Solid Pilot — 6.0mm dia.
100-6.02 Solid Pilot — 6.02mm dia.
140-5.0 Solid Pilot — 5.0mm dia.
140-5.02 Solid Pilot — 5.02mm dia.
140-6.0 Solid Pilot — 6.0mm dia.
140-6.02 Solid Pilot — 6.02mm dia.
140-6.98 Solid Pilot — 6.98mm dia.
140-7.0 Solid Pilot — 7.0mm dia.
140-7.98 Solid Pilot — 7.98mm dia.
140-8.0 Solid Pilot — 8.0mm dia.

Accessories:

TW505 T-Wrench

TW503-1 Adaptor. 1/2” to 3/8”

CA497 Case

KACC246 Accessories Kit

*Item image is for informational purposes only and is a general representation of the contents of a kit. The exact contents of the kit are listed above.

Valve Seat Cutting with Neway
Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly valve seat cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes. Tungsten carbide leaves a perfectly flat, machined surface, ideal for optimal sealing efficiency and heat transfer.

Product Instructions:
Neway Cutter Instruction Manual (1.9 MB Requires Adobe Acrobat Reader)