.2165" (5.50mm) Solid Carbide Valve Guide Reamer

Backordered until mid October

• Extended (1.500"L) 3-flute pilot design holds cutting oil in contact with the work piece at all times
• Reamer body features a revolutionary 8-flute design to cut bronze valve guides quickly, accurately and repeatedly
• Reamer body measures 2.000" (nominally)
• Shank length measures 1.750" (nominally)
• Overall length measures 5.250" (nominally)
• New cutting geometry requires less torque to drive the reamer
• More rigid tool construction
• Fast feeds than conventional design
• Pilot measures approximately .005" smaller than cutting diameter to allow easier alignment with bushing
• Use at 300 to 400 RPM

For best results, always use Bronze Reaming Oil (sold separately)