Head Surfacer Belt - 80 Grit Black Silicon Carbide
Cylinder Head Resurfacing Belt - 15" x 127-1/2" Black Silicon-Carbide for Cast Iron and Aluminum – 80 Grit
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 15 inch wide by 127-1/2 inch belts will fit the follwing machines: Storm Vulcan / Anderson AB1540A, Peterson PG-1500, Kansas Instruments PG-1500, Winona Van Norman BR-1500, BG-1515, BG-1520, IDL HS-4350
• Quantity discounts are available! Discounts will be applied after the order is placed:
• 3 - 4 belts = 10% discount
• 5 + belts - 15% discount
• Each belt is manufactured with good quality, black silicon-carbide abrasive grains that are treated for extra long life. Silicon-carbide belts can be used on cast iron and aluminum. Aluminum surfaces best with 60 or 80 grit belts. Down pressure is optional for cast iron, not recommended for aluminum.
• 15 inch wide by 127-1/2 inch belts will fit the follwing machines: Storm Vulcan / Anderson AB1540A, Peterson PG-1500, Kansas Instruments PG-1500, Winona Van Norman BR-1500, BG-1515, BG-1520, IDL HS-4350
• Quantity discounts are available! Discounts will be applied after the order is placed:
• 3 - 4 belts = 10% discount
• 5 + belts - 15% discount
