Head Surfacer Belt - 40 Grit Zirconia
Cylinder Head Resurfacing Belt - 15" x 127-1/2" Zirconia for Cast Iron and Aluminum – 40 Grit
• Each belt is manufactured with higher quality, zirconia abrasive grains that are best suited for quick cutting, long life and high production rates. Zirconia belts can be used on cast iron and steel. Down pressure is required
• 15 inch wide by 127-1/2 inch belts will fit the following machines: Storm Vulcan / Anderson AB1540A, Peterson PG-1500, Kansas Instruments PG-1500, Winona Van Norman BR-1500, BG-1515, BG-1520, IDL HS-4350
• Each belt is manufactured with higher quality, zirconia abrasive grains that are best suited for quick cutting, long life and high production rates. Zirconia belts can be used on cast iron and steel. Down pressure is required
• 15 inch wide by 127-1/2 inch belts will fit the following machines: Storm Vulcan / Anderson AB1540A, Peterson PG-1500, Kansas Instruments PG-1500, Winona Van Norman BR-1500, BG-1515, BG-1520, IDL HS-4350