Head Surfacer Belt - 60 Grit Zirconia
Cylinder Head Resurfacing Belt - 11-7/8" x 101" Zirconia for Cast Iron and Aluminum – 60 Grit
• Each belt is manufactured with higher quality, zirconia abrasive grains that are best suited for quick cutting, long life and high production rates. Zirconia belts can be used on cast iron and steel. Down pressure is required
• 11-7/8 inch wide by 101 inch belts will fit the following machines: Winona Van Norman PG-1232
• Each belt is manufactured with higher quality, zirconia abrasive grains that are best suited for quick cutting, long life and high production rates. Zirconia belts can be used on cast iron and steel. Down pressure is required
• 11-7/8 inch wide by 101 inch belts will fit the following machines: Winona Van Norman PG-1232