Head Surfacer Belt - 120 Grit Blue Zirconia
Cylinder Head Resurfacing Belt - 11-7/8" x 101" Blue Zirconia for Cast Iron and Aluminum – 120 Grit
• Each belt is manufactured with higher quality, blue zirconia abrasive grains that are best suited for quick cutting, long life and high production rates. Blue Zirconia belts can be used on cast iron and steel. Down pressure is required
• 11-7/8 inch wide by 101 inch belts will fit the follwing machines: Winona Van Norman PG-1232
• Quantity discounts are available! Discounts will be applied after the order is placed:
• 3 - 4 belts = 10% discount
• 5 + belts - 15% discount
• Each belt is manufactured with higher quality, blue zirconia abrasive grains that are best suited for quick cutting, long life and high production rates. Blue Zirconia belts can be used on cast iron and steel. Down pressure is required
• 11-7/8 inch wide by 101 inch belts will fit the follwing machines: Winona Van Norman PG-1232
• Quantity discounts are available! Discounts will be applied after the order is placed:
• 3 - 4 belts = 10% discount
• 5 + belts - 15% discount
