We are open for business and shipping daily
800-433-1870 Mon - Fri | 8am - 5pm PST
Neway Valve Seat Cutter Kit - Motocross Bikes

Neway Valve Seat Cutter Kit - Motocross Bikes

Item# KM2600
$892.00
Availability: Usually ships the same business day
Neway KM2600 Motocross Bike Kit
For use on all popular motocross bikes. Additional cutters required where valve sizes are smaller than 22mm (e.g. Honda CRF 50). For KTM add two 6mm pilots: 100-6.0 and 140-6.0.

Kit Includes the Following:

Cutter Bodies:

  • 122 Cutter — 1” dia. 45˚
  • 123 Cutter — 1” dia. 31˚
  • 111 Cutter — 1” dia. 60˚
  • 607 Cutter — 1-1/4” dia. 30˚
  • 608 Cutter — 1-1/4” dia. 45˚
  • 270 Cutter — 1-1/4” dia. 60˚
  • 626 Cutter — 1-1/2” dia. 30˚ x 45˚

Valve Guide Pilots:

  • 100-4.0 Solid Pilot — 4mm dia.
  • 100-4.5 Solid Pilot — 4.5mm dia.
  • 100-5.0 Solid Pilot — 5mm dia.
  • 140-4.5 Solid Pilot — 4.5mm dia.
  • 140-5.0 Solid Pilot — 5.0mm dia.
  • 140-5.5 Solid Pilot — 5.5mm dia.

Accessories:

  • TW505 T-Wrench
  • TW503-1 Adaptor. 1/2” to 3/8”
  • CA497 Case
  • KACC246 Accessories Kit

*Item image is for informational purposes only and is a general representation of the contents of a kit. The exact contents of the kit are listed above.

Valve Seat Cutting with Neway
Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly valve seat cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes. Tungsten carbide leaves a perfectly flat, machined surface, ideal for optimal sealing efficiency and heat transfer.


Product Instructions:
Neway Cutter Instruction Manual (1.9 MB Requires Adobe Acrobat Reader)

Scroll to top