Neway Valve Seat Cutter Kit - Three Angle Power Equipment
Neway LG2010 Three Angle Power Equipment Kit
The LG2010 kit includes everything necessary for three-angle valve seat reconditioning on most air cooled engines. It offers the same precision and accuracy as the LG3010, but does not contain the #103 and #111 cutters or 6mm pilots necessary for OHV work. Power equipment kits are intended to be used on power equipment (generators, lawnmowers, etc.) not automotive or motorcycles.
The LG2010 kit includes everything necessary for three-angle valve seat reconditioning on most air cooled engines. It offers the same precision and accuracy as the LG3010, but does not contain the #103 and #111 cutters or 6mm pilots necessary for OHV work. Power equipment kits are intended to be used on power equipment (generators, lawnmowers, etc.) not automotive or motorcycles.
Kit Includes the Following:
Cutter Bodies:
- 102 Cutter — 1-5/16” dia. 31˚ x 46˚
- 124 Cutter — 1-5/16” dia. 15˚ x 60˚
Valve Guide Pilots:
- 100-1/4 Solid Pilot — 1/4" dia.
- 100-1/4+1 Solid Pilot — 1/4" + .001" dia.
- 100-9/32 Solid Pilot — 9/32" dia.
- 100-5/16 Solid Pilot — 5/16" dia.
- 100-5/16+1 Solid Pilot — 5/16" + .001" dia.
- 100-8.0 Solid Pilot — 8.0mm dia.
Accessories:
- TW513 T-Wrench
- CA303 Case
- KACC246 Accessories Kit
*Item image is for informational purposes only and is a general representation of the contents of a kit. The exact contents of the kit are listed above.
Valve Seat Cutting with Neway
Valve seat reconditioning is simple, accurate, and clean with Neway’s carbide-bladed cutters. Neway’s user-friendly valve seat cutters allow you to precisely machine a multi-angle valve seat in a matter of minutes. Tungsten carbide leaves a perfectly flat, machined surface, ideal for optimal sealing efficiency and heat transfer.
Product Instructions:
Neway Cutter Instruction Manual (1.9 MB Requires Adobe Acrobat Reader)